Replace rear wheel Mi Electric Scooter (M365)

Wheel change on the Mi Electric Scooter (M365) is pretty straight forward, but you'll need some tools and patient
This guide will look into how to remove the wheel from the Mi Electric Scooter (M365), but not on changing the tire. We also have an guide on replacing tire here
Difficulty: Medium
Time: 30min
Equipment needed
To change the wheel, a few tools will be neededTools:
- Allen/Hex key 2
- Allen/Hex key 4
- Small knife
Remove reflectors
When you've ensured you've required tools, you can place the bike on top of a chair or table. Just remember it will be front heavy later, when you remove the rear wheel. So ensure it's stableStart by removing the reflectore. Feel with your finger to find the hole for screw and use a small knife to slide in between the reflector and the reflector holder. Then gently peel it off
Lay the sticker with the glue facing up and avoid touching the glue side as much as possible
Remove the reflector holder
After the reflector is removed, you can remove the two hex screws and the reflector holder will come offI normally put all the screws belonging to one side, inside the holder of the side to keep track of them
Remove the screw for tire axis
Now that the reflector holder is off, you'll have access to the screw for the tire axisAfter it's removed, you can do the same steps on the other side and the tire should be loose
Remove wheel
Then you can slide out the wheel, straight backwards. Do notice that the sides of the wheel rim, connecting the bike and the wheel. Are not completely round, but are flat on two sides. These needs to align, later when you put the a wheel back onto the eScooterNow that the wheel is off, you can proceed replaceing the tire
This is how you remove the rear wheel on Mi Electric Scooter (M365). If you want to put on a wheel, then follow this guide in reverse